How to Install

Step1. Measure up from sill the blind length on each side of window and mark on wall where top of wood blind bracket should be mounted.

Step 2. Mount blind to front of window so that front edge of closed bracket is 1/8" inside window. This allows you to rest the arch on the blind head rail.

Step 3. Install blind and check to see that it is level in the window.

Step 4. Check with customer to determine what is the desired angle the slats should be set to prior to installing the arch. Usually setting them at a right angle to the incoming sunlight is best. Note: slats move only on sunburst arches.

Step 5. Rest arch on head rail and center arch in window side to side and secure arch in predrilled holes on both sides.

Step 6. Secure arch to wall with #4 finish nails as needed.

Step 7. Attach valance with heavy duty Velcro lining up valance with any nearby windows.

Step 8. On larger arches some walls are crooked and the gap should be filled in with caulking. We recommend adhesive white caulk found in a red tube for about two dollars.